"TheScullster" wrote in message
. uk...
Hi all

More kitchen stuff....
I intend to fit a Myson Kick Space heater to avoid using wall space for a
radiator.
In the "technical" manual downloaded, the instruction for connection of a
room stat states "If a remote room thermostat is required, wire it into
the fused spur at this stage".

All sounds far too vague for my liking!


So the questions a

What room stat to use?
Cable or flex to this stat and spec?
How is this "wired in to the fused spur"? Does the stat simply act as a
switch and need wiring across the live from the fused spur to the heater?


I assume that you have decided that you do really need a seperate thermostat
for the kitchen?

I fitted a kickspace heater in the last kitchen I did and it had an inbuilt
thermostat which turned the fan on when hot water was flowing.
This worked fine with a master thermostat in the hall and individual
thermostats on the radiators elsewhere.

HTH

Dave R
--
No plan survives contact with the enemy.

Helmuth von Moltke the Elder