"J. Clarke" wrote in message
...
On 7/9/2010 7:41 AM, basilisk wrote:
On Thu, 8 Jul 2010 21:51:05 -0700 (PDT), Hoosierpopi wrote:

Using one of those 24" drill bits (from HFT) to drill a hole through
three pieces of material while standing on a ladder I felt something.

I kept on going and drilled the first eight-inch hole, drove in the
bolt and tightened it up before proceeding to drill the hole for the
second bolt.

This time, I turned my head to sight down the bit to make sure I
drilled a straight hole and really felt something.

My long hair had wrapped around the drill bit so tight that I actually
pulled a 2 x 3" patch of hair from my scalp!

Hurt like hell for a minute or so while my wife (glad she was there)
helped me reverse the bit, get off the ladder and extricate my head
from my electric drill.

Thought it was worth posting my wife's advice - "pull your hair back
and wrap it in a pony tail."

Ouch!

I worked at a log house factory back in the 70"s
and saw a guy get about half his hair yanked out
on a large pantograph router, busted his head
up badly when it smacked the side of the machine.
He was lucky all he lost was hair.

I have long hair and keep it tied in a pony tail
most all the time, especially when working.

I used to. Then my router started climbing my hair. Fortunately it
stalled before it got to my face. I walked into the first barber shop (or
what passes for one these days) I saw and asked for a #2 buzz cut. The guy
looked at me like I was nuts. I asked him what the problem was. He had no
idea what "#2 buzz cut" meant. I thanked him for his time, went down to
Wally World and shelled out 20 bucks for a clipper, put the #2 comb on it,
and problem solved.



Ties can also be a problem. CFO of a company I worked for was working late
one night and got his tie caught in the portable shredder. The shredder
chewed its way up his tie as he madly tried to power it off. He nailed the
tied to the wall above the shredder. Made you think before shredding.