On Jul 8, 11:54*pm, "DoN. Nichols" wrote:
On 2010-07-09, Denis G. wrote:
On Jul 8, 8:29*pm, "DoN. Nichols" wrote:
* * * * [ ... ]
* * * * Hmm ... there is a nice web like sleeving intended to go over
electrical cables. *Various colors in various sizes. *You push the ends
towards the middle and it expands, so it will fit a reasonable range of
file sizes. *I've just got some samples -- maybe I need to look up where
to get it and buy enough to handle all my files plus a bit. *(Several of
my files are in a vinyl pocket pouch which I picked up at a hamfest,
new. *The files were all Nicholson files, and some are safe-edge files,
which is why I bought the set in the first place. *I *love* safe-edge
files.
* * * * [ ... ]
I'm not sure I understand the advantage of having a safe edge for a
file (i.e. a smooth side with no teeth).
* * * * Let's say that you need a rectangular opening in an instrument
panel -- with sharp corners.
* * * * You can mill out the rectangle, but will wind up with rounded
corners, which man interfere with putting the instrument or control you
want into the hole.
* * * * The safe-edge files let you concentrate on squaring up one edge
at a time, without risk of the cut wandering too far into the other
edge.
* * * * Same with any other filing up to a shoulder when you don't want
to file the shoulder itself.
Ok, that makes sense. I've always managed those types of jobs with
regular files and trying to mind which side I needed to press on to
guide the cut. There are so many types of files that it seems like a
challenge just to learn the names, never mind learning what job each
is best suited for using.
* * * * * * * * * * * * * * * * * * * * * *I do have some of those in
my collection. *Most of the files that I have are second-hand, but
quite a few are in good shape and have seen little use. *Some of them
have been ground for use as scrapers.
* * * * Quite a collection.
If you find a reference or source for the sleeving you mentioned,
plese let us know. *I thought of making a roll up pouch to combine
some of the best of my files, but my sewing skills need more work.
* * * * O.K. *I remembered that it is also used to protect machined
shafts in shipping. *(There is a length of it on the shaft of the spare
spindle motor for my Bridgeport mill. *So I looked in MSC's "Big Book",
and found it in the upper left-hand corner of page 2862 in the 2009/2010
Big Book.
* * * * A typical example is part number 31993090, which fits round
shafts from 1" diameter to 1-1/2" diameter. *Color of this one is red.
The price is $0.89 for a 36" length. *Up to you to figure out which
sizes you really want to use for a given collection of files. *I guess
convert the perimeter of each file at its largest to a diameter, and get
sleeving which will accept that diameter. *Maybe the next size up, in
case it does not like turning corners much.
Ok, I'll have to get some to try. Thanks.
* * * * Enjoy,
* * * * * * * * DoN.
--
*Email: * * | Voice (all times): (703) 938-4564
* * * * (too) near Washington D.C. |http://www.d-and-d.com/dnichols/DoN.html
* * * * * *--- Black Holes are where God is dividing by zero ---