Thread
:
A good (and long) article about rust
View Single Post
#
4
Posted to rec.woodworking
J. Clarke
external usenet poster
Posts: 4,207
A good (and long) article about rust
On 7/5/2010 9:30 PM,
wrote:
On Mon, 5 Jul 2010 00:52:57 -0700, "Lobby
wrote:
wrote in message
...
I have seen a lot of this, but not in one place and not so well-written?
http://www.metalwebnews.com/howto/rust/rust.html
woodstuff
From the link:
"You can discourage rust a number of ways. For my woodworking tools, like my
table saw and jointer tops, I use Automobile Paste Wax. I put it on fairly
heavily and often. It seems to work well. There are also cream waxes, but
these contain some water, so I stick with paste. "
Automobile paste wax frequently - Real Frequently - contains silicones.
Silicones are not conducive to decent finishes on wood. As wood passes over
a waxed surface containing silicones it picks up some of those silicones and
renders it difficult to finish.
Use Boeshield or Johnson red stripe paste wax.
This was a jump off the page issue. After seeing this, I did not bother
reading the rest of it.
Automotive "paste wax" does not contain silicones.
You've personally analyzed every such product on the market? You have a
source that has done so?
Many "automotive polishes" do.
Automotive "paste wax" is much like Johnson paste wax - usually high
in Carnaubu, along with mixtures of paraffin , beaswax, and what have
you - but NOT silicone.None of Turtles "paste waxes" including super
hard shell, super hard shell carnaubu,extreme paste wax or liquid
paste wax contain silicones.
Per http://www.turtlewax.com/res/msds/T411R.pdf, Turtle Wax PLATINUM
SERIES ULTRA GLOSS PASTE WAX contains 7-10 percent Volatile Silicone
D-5. Oops.
Nor does the original formula Simoniz,
which is still available.
From where?
Sorry, but Johnson and Butcher's have a track record, car waxes do not.
If you can provide a list of car waxes that are silicone-free and can
back that list up with test results you'll be doing a useful service,
but your blanket statement is just plain wrong.
Reply With Quote
J. Clarke
View Public Profile
Find all posts by J. Clarke