Smitty Two wrote:
In article ,
" wrote:
....

Not to mention that. But actually it looks like dpb's link was to a
nozzle that covers either a 15' radius, or a 3' diameter area, depending
on one's interpretation. I guess if it's the former I wouldn't need 60
of them ...

That's a typo...the 3' should be 30' diameter in the text. We've got
'em at 20' spacing as that's the purlin spacing which was convenient for
piping.

There's a barb connection little plastic one I've never seen that's
lower volume, product
WF4060 - Droplet Emitter
• 1/2 GPH @ 15-60 PSI.

See other note on cooling amount vis a vis flow rates, though...

--