Rega RB300 turntable...
Arfa Daily wrote:
Hi all
Anyone happen to know the value of the resistor in the CR network connected
in the synchronous motor feed ? Looks like brown - red - brown so 120 ohms,
but it's well overheated and discoloured, with a nice burn mark right around
the spiral element, right in the centre. Can't get a reading from either end
to the burn point. Looks at a guess to be rated about 3 -5 watts. Anybody
think of a reason *not* to use a wirewound rather than the original metal
film type ?
Arfa
Hi Arfa
Just took the cover off a Rega Planar 3 and the board has 5 components
on it.
1 x .22uf 275v ac cap (220nf)
1 x 10k 5% 1-2 watt parallel (physically) to the cap (bn bk or -gold)
1 x 1M 1% 1/4 watt (br bk bk yell -bn)
1 x 3k3 1% 1/4 watt (or or bk bn -bn)
1 x 120nf 400v dc cap
HTH
DaveD
|