Moved into a house in February which still has a functional outside loo.
But the water fittings in loo were weaping somewhere.

Tried to turn off water in the loo, but the stop tap was seized for hand
turning.

I left it until I had some time to deal with.
Tried turning it with a stilson and the drip turned into a woosh from
the joint above.

In the end I just opened up the joint and there was no olive, but plenty
of old PTFE. I stuck in a spare olive I had tightened down and at least
the leak is now sorted.

Plan was to turn off water, cut pipe and fit garden tap, and remove loo
and turn into shed.

But I have one old broken off stop stap on the old lead pipe.
One seized stop tap on the lead to copper adaptor.

Can't see any other way to turn off the water except possible the whole
house supply and unfortunatly the house indoor stop tap is now behind
the washing machine.

Apart from it being a wet and messy(physically and aesthetically) way,
is there any reason why I can't cut off the pipe above the seized stop
tap, get wet while it gushes again and fit a 15mm push on stop tap or
isolator valve to the stub of pipe?

I can then turn it off and remove the rest of the system at my leisure
and stick on the garden tap once I have the room.

Thoughts? Can't afford a plumber but don't fancy messing with the old
soft lead piping that looks to be very short at the ground level, and a
push on stop tap would do the job.

--
Carl Robson
Get cashback on your purchases
Topcashback http://www.TopCashBack.co.uk/skraggy_uk/ref/index.htm
Greasypalm http://www.greasypalm.co.uk/r/?l=1006553