On 2010-05-08, Ed Huntress wrote:

"Ned Simmons" wrote in message
...
On Sat, 8 May 2010 14:46:36 -0400, "Ed Huntress"
wrote:


"Ned Simmons" wrote in message
...
On Sat, 8 May 2010 13:51:57 -0400, "Ed Huntress"
wrote:


I've done cold-rust bluing and browning with good success on a new
barrel,
and on tools, but that isn't going to do it for you any more than
hot-tanking is. As Steve says, your best bet is to get one of the quick
blacking solutions from Brownells and see how good you are at doing
makeup.
d8-)

Oxpho blue works well.
http://www.brownells.com/.aspx/pid=1...XPHO_BLUE_reg_


It sounds good. Someone else recommended it here, years ago, but I haven't
tried it. I think Iggy is looking for black though, no?

Oxpho Blue is an unfortunate name. The solution is a pretty blue
color. The end result on cold rolled mild steel, which is what I've
used in on, is an opaque black.


Aha. That could be useful on tools. Maybe it's what Iggy needs, after all.


I do not know,the web page talks about "bluing"?

i