View Single Post
  #66   Report Post  
Posted to rec.woodworking
Larry Blanchard Larry Blanchard is offline
external usenet poster
 
Posts: 2,532
Default Do you use any computer based tool for doing project layout?

On Sun, 11 Apr 2010 17:29:27 -0700, LDosser wrote:

I'll put in a Univac and a Ramac :-).

I'll raise you punchboards ...


402,403,407,509,552,077?

--
Intelligence is an experiment that failed - G. B. Shaw


407 - but only when forced to = tab shop manager out sick!


Another operator and I once wired a 407 plugboard to list missing checks
for payroll reconciliation. The checks were punched cards so we were
running them through and listing the ones that weren't there! IBM said
it couldn't be done. There were so many wires (including quite a few one
way wires) we had to pull some and put in the "permanent" wires so we
could get a cover on the board.

It worked fine for several months and suddenly stopped working. We
accosted the IBM CE and he confessed he'd done a "tuneup" and found the
timing was a little off so he fixed it. We convinced him to put it back
the way it was. Thereafter, for at least as long as I worked there,
there was a sign on the 407 that threatened immediate beheading for
anyone who touched it!

BTW, the first payroll system written for the Univac took 8-9 days to
run. For a weekly payroll! Seems table lookups on mag tape were just a
mite too slow :-).

--
Intelligence is an experiment that failed - G. B. Shaw