DIYbanter - View Single Post

Bud--

wrote:
On Mar 26, 12:06 pm, (MICHELLE H.) wrote:
Yes, that it what it is, the smaller "Comcast DTA boxes" that you have
to now use, if you don't have a full-size "Comcast Converter Box".

Comcast gives you 2 for "free", but I am sure that the cost is worked
into the bill somehow?

Also, I have a TV and a VCR in the bedroom, so I need to hook the "DTA"
box up in there now. One of the other questions I have is, when hooking
it up to the TV and VCR, do I need to use "digital cable wires"
specifically because the "DTA Box" is a digital box, or can I just use
the cheap "push in" antenna in/out wires that I use now?

The new converters available here a
Digital set top box - programmed channel changes, on-demand, ...
Digital adapter - simple version of the above
HD receiver

Do you get 16:9 HD with the first 2, or do you need the 3rd?
Now (analog) Comcast has 4:3 and 16:9 HD versions of some channels. Will
that continue, with the 3rd converter required for 16:9 HD? If not, what
different do you get with the HD receiver?

(I have not yet called Comcast to sort all this out.)

You can continue to use the same cables you are using now. The boxes
output signals that any TV or VCR will input. The exception would be
if you're moving to HD, then you would need the appropriate component
video or HDMI cables.

I have read that the first two converters (above) have coax out. They
could still send 16:9 HD signals to a single QAM channel. (That wouldn't
work with the VCR.)
Or maybe it is NTSC/analog - which would work. Sounds from hr's post
that this is what it is.

I have also read than none of them have audio out - so if you are
listening to audio-only channels you need to get audio from the TV.

Lower channels here will mostly be local broadcast stations. _All_ upper
channels (probably all that the OP talked about) will be scrambled. They
will not be available without a converter or device with cable card.