ARGH!!! brake controller 104
"Jim Wilkins" wrote in message
...
On Mar 24, 6:32 pm, "Karl Townsend"
wrote:
I bought a brake controller that uses a sensor in the brake line. Today, I
took the brake line apart at the master cylinder, installed the "T" and
sensor. Had my better half pump the brakes while I bled. No big deal, I
thought.
Well, as soon as I started the truck, the brake warning light came on. So
I
had the better half pump the brakes while I bled a whole can through the
front wheels. No joy.
I called "the Kid". He said to get a vacuum device from bumper bumper for
only $20. Well, it was $50. But I got it and bled a can through each front
wheel. No sign of bubbles at all. Note: the sensor is on the front set on
the tandem brakes
Still no joy. I got a brake warning light. I just got ****ed and called it
a
day. What do I do tomorrow?
Karl
Did you bleed the line to the sensor? You may have unbalanced the two
hydraulic circuits.
jsw
Yea, step 1 above.
What are you talking about unbalancing the circuits???
I just talked with "the kid".I 'll bleed the rear brakes tommorrow. if that
don't work, I'll remove the sensor.
Karl
|