Unused Classified wrote:
Hi,
I have the plasma tv properly mounted and I made a hole in the
sheetrock behind it and ran the wires down near the other hole just
above the baseboard. Now I need some kind of face plate that will
cover the holes and close around several hdmi cables and the power
cord. What the proper piece of hardware for this job? Thanks.
get an "old work low voltage ring" and a blank cover plate. then drill
out the cover plate until the hole is big enough to pass your wires through.
nate
--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel