Winch power supply
Steve B wrote:
"Robert Swinney" wrote in message
...
Steve sez:
"Since it is 12v. what would I use as a power supply that would give me
the same as
an automotive setup?"
The simple answer is: A battery of the same rating as used in an
automotive setup.
Bob Swinney
I didn't state that I wanted to use an AC power source, and not have the
falderal of maintaining a battery. That is why I asked that question.
Please reread and try again.
Steve
Nice.
OK, IMHO the proper answer is "ask a better question".
There's absolutely no way to know how much current the
winch will draw given the information you have supplied.
If I were doing this, and I wouldn't, I'd buy the winch,
hook it to a car battery, lift/pull the max load that
I'd want it to handle while measuring its current draw.
I'd then build/buy a 12 volt power supply with a current
capacity of 150 to 200 percent greater than I measured.
The problem is that the power supply will likely be far
bigger/more expensive than you'll want.
|