Mike wrote:
On Dec 8, 12:24 pm, "HeyBub" wrote:
Mike wrote:
Hi all. My garage door is old (maybe 30 years) and probably needs to
be replaced - but not right now. In the short term, I'm seeking a
little advice from the good folks here. When the door is closed, the
middle of the door makes good contact with the floor, but I can see
daylight on both ends. I bought another rubber strip for the bottom
of the door, cut it into pieces and nailed a few pieces to both
ends, but that didn't really have the desired effect - I can still
see daylight under the ends when the door is closed. Here is what
I'm pondering - what if I remove the rubber strip(s) currently on
the door, get some paint stirrers and staple them to the bottom of
the door (3 stacked on the very end, then 2 next to the 3, then 1)
to fill in the space. Then re-attach the rubber strip. The idea
being to
fill the gaps with the paint stirrers. A friend suggested maybe just
nailing the paint stirrers to the inside (back) of the door at the
bottom rather than attaching them to the bottom to block the
opening, so that is also a possibility.

Any of you folks had to deal with such a situation? How did you fix
it (short of replacing the door)?

Why do you care?

If you're developing film in the garage, take a look at the new
digital cameras.- Hide quoted text -

- Show quoted text -

It's not the light I'm trying to keep out, it's the small animals that
can get under there.


Ah! Okay, then.

Think cat.