wrote:

ps. Morris, How did those silverware trays come out in the end? I
never did hear the end of it.

They came out fairly well. I had some photos on my web site for a while
to show the joinery and clamping. There is still one page with photos
showing the jig used for cutting the angled tenons on the diagonal
divider blanks at

http://www.iedu.com/DeSoto/Projects/Bevel/

(After the tenons were cut, 1/4" was trimmed from top and bottom of each
divider)

It was an interesting challenge to make the boxes dead-on square with
invisible glue lines at the ends of diagonal dividers.

The customer was happy.

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/