View Single Post
  #16   Report Post  
Posted to sci.electronics.repair
mm mm is offline
external usenet poster
 
Posts: 7,824
Default One more antenna question: Antenna pitch?

On Wed, 2 Dec 2009 01:44:24 -0800 (PST), wrote:

On Nov 30, 11:46*pm, mm wrote:
One more antenna question: Antenna pitch?

That is, my attic has a pitched roof and the antenna for channels 7 to
60 that I'm thinking of now is almost 13 feet long.

It would fit more easily in the attic if I pointed it down a little
bit just like the roof pitches down from the center. *Does the angle
of the axis matter that much if the individual elements are all
horizontal? *

After all, if the tranmitter is higher than the antenna, it's as if
even a horizontal antenna is pointed down, from the pov of the
transmitter.

I've been reading but nothing has addressed this. * All outdoor
antennas are of course horizontal, and I don't get to see people's
indoor antennas.

BTW, as to loss of signal in an attic,
http://www.dennysantennaservice.com/...tallation.html
says: "A plywood roof covered by a single layer of asphalt shingles is
best.", (that is, other roofs are worse) and that's just what I have.
I'm sure it would still work better on the roof, but if I lose one or
two stations, I can accept that.


You don't want or need a 13 ft beastly antenna that can get channels
2-6.


I thought this one didn't get 2-6, but I should go check again.

This little guy will be much easier to handle in the attic
(though it's better outside) and has reasonable gain. Don't jet
fighters release 'chaff' to screw up the enemy? Seems a lot like nails
suspended in sheets of plywood. That's one reason to be outside of the
'chaff'.


Good point. Not only that, the roofer used nails that are a lot
longer for the second roof than they had used for the first roof. And
my hair isn't as thick as it used to be if that matters, but I'm more
afraid I'm going to jab my head then I used to be.

http://www.winegard.com/kbase/upload/HD7694P.pdf

BTW there are no channels 51 any more.


Thanks a lot.