Which tool is needed. . . ?
On Thu, 26 Nov 2009 20:45:52 +0000, Mark Rand wrote:
On Thu, 26 Nov 2009 13:22:11 -0500, "Ed Huntress"
wrote:
The HLV has a pair of the same bearings as above back-to-back at the front.
clamped together by the outer races and a deep groove ball bearing at the rear
floating in a bore, but lightly loaded with a wave washer.
Update, caused by going out to the shed and actually looking at the bearings I
took out...
The HLV-H and HLV front bearings are Fafnir 9111W1 angular contact. The HLV
rear is a 9110W1 angular contact.
Mark Rand
RTFM
|