On Nov 11, 8:38*am, RickWeb wrote:
Hi,

I have an idea for my basement ceiling and was wondering if anyone has
done something similar. I want access to the wires, pipes etc in the
basement ceiling and do not want to use the typical t-bar ceiling.

I was thinking about making ten I-Beams about 4 or 5 inches in height
out of wood and installing then to my floor joists. *They would be
spaced about 24" apart. I then plan to rest a piece of drywall (about
26" wide) on the top edge of the bottom plate of each I-Beam. *The
drywall would be suspended and easily removable. *The bottom plate of
the I-Beam is then stained to match the fireplace mantle, wet bar, and
built in book shelfs. I will need about ten I-Beams at 12 feet in
length (think of these as Main-T's) and I will then place shorter
wooden I-Beams as cross T's.

Anyone see an issue with this method? *My only concern is the sagging
of the drywall. *If it is spaced no more than 24" apart, do you think
it will sag?

So...wooden I-beams like below with drywall resting on the lower plate
of each I-Beam. *That's it.
__ * * * * * * * * * * * * * * __
_|_ _______________ _|_
* * * * * * *drywall

Thanks,

The thing that would worry me is if the drywall (or other relatively
heavy material) is just resting on the ledges you have created, there
is a chance you could bump it with something and it comes falling
down. A 2x4' ceiling tile is one thing to fall on your head, a big
piece of drywall is quite another.

Ken