Baron writes:

Samuel M. Goldwasser wrote:

IMO There are only a few onboard chipsets that are good in quality -
the rest, including realtek, tend to be rather noisy.

That's my feeling at this point. I'm also not that fussy as long as
it sounds decent. I don't need to shake the foundation.


On board sound chip failure is very very common. I wish I had a £($)
for every new machine or mainboard I've seen that had to have sound
card added because of it !

I've seen chips fitted rotated 90 out on the mainboard.

OK, failures I can believe. This one supposedly worked at some point,
maybe.

Thanks!

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.