Motor question
I have a 115v, 1 1/8 HP motor with a faceplate rating of 13 Amps. It
actually draws 17 Amps (according to the Kill-A-Watt) with no load.
Does the difference mean anything important?
Thanks in advance for any advice.
P.S.
I haven't run the motor for more than a couple of minutes...
*With one horsepower equaling 746 watts even the nameplate rating sounds a
little high. If it is still high with your ammeter you could have a bad
bearing, but you should be able to hear that.
Let us know what you find.
|