"Steve Turner" wrote in message
...
wrote:
On Oct 28, 5:53 pm, "Leon" wrote:
"jtpr" wrote in message

...

I have a Delta DC with a 4" intake. I see pictures of shops all the
time with metal ductwork running around the shop for use with similar
units, but when I look around the local HD I don't find anything that
seems to match up with the 4" hoses.
What is it I use for this?
Thanks,
Jim
I finally bit the bullet about 3-4 years ago and bought a canister 1100
CFM
Jet DC. All of my equipment is mobile so I simply use 2, 10' clear
flexable
hoses to make a single 20' hose that reaches most any where in the shop.
I
have no plans to upgrade. For closer equipment the hose hangs from a
hook
at the ceiling near the DC. I take it down if I need to go farther with
it.
I added a quick taper connect to the end for fast connection and
disconnect.
Totally dependable and trouble free. Cost, about $50.

I just bought a DC and this is basically what I'm doing now. The
problem is that the saw and planer tend to be in the middle of the
shop (read: garage) floor so the hose is always in the way. I have
the planer on a cart so it gets put away when not in use but the saw
more or less sits.
I plan on converting the area that is normally the "bonus room" above
the garage into a shop. I have to raise the floor another ~8" so I
thought I'd run the DC pipes under the floor to the saw. I'll likely
still leave the planer on the cart.

Other tools tend to stand against the walls so quick disconnects
(behind them) would seem to be a problem there, too. I'm just in the
planning stage so I'd appreciate hearing from others.

Leon has talked about his dust collection approach before, and I think
what he's doing is mostly workable and cost-effective. After years of
dealing with just a shop vac (almost totally inadequate), I bit the bullet
and went with a big Grizzly cyclone with full ducting (snap-lock) routed
to all the big machines: table saw, radial-arm saw, planer, jointer, and
band saw. That too is working great, but I've *not* run ducting to my
router table, Ridgid belt/spindle sander, or drill press. Those machines
need *something* because they can create a hell of a mess, but I can't see
firing up the big cyclone to catch a pee cup's worth of dust. For those
little guys, I'm still falling back on the shop-vac, which is still
semi-inadequate, and having to use it just kinda ****es me off :-) I'd
also like to have a small portable dust collector to replace the shop-vac.

Why not use the DC for the router table? Is it too loud? Mine is right
next to the router table and not really loud. Actually I often leave it
running, but anyway I have hearing protection when I use the router, or
planer.
If you simply don't have a way to reach it, run a temp hose. My hose
literally reaches every thing that needs dust management. Yeah I have to
step over it but it is a small price to pay and it is long enough that I
don't trip, it slides out of the way.
for some reason hearing protection does not seem to work against my " old
shop vac". Don't need it at all with the Festool vac. The finish sander
drowns out the Festool vac.






I kinda see this in the same light as my bandsaw situation; I have a nice
hefty 16" eye-tal-yun made Minimax cast-iron "tank", but it would also be
kinda nice to have a smaller 14" light-duty "sports car" so I could keep a
3/4" Woodslicer on the tank and a little 1/4" curve-cutter on the sports
car.

--
Any given amount of traffic flow, no matter how
sparse, will expand to fill all available lanes.
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/