On Aug 27, 10:23*pm, "Tom" wrote:
Need someone willing to machine 20 cavity's
in 2 plates for a total of 40 Will be a half cirlce radius in each plate for
a total of 1.0625. Needs to be .001 tolerance. Plates will be 7000 *Aluminum
that I will supply. .750 x 6 x 6. This will be a 1.0625 ball mold and
locating is very important. Need as small a seem as possible. The 2 halves
need to be pin located with a .125 hole extending to the top plate *of *each
of the 20 radius cuts in the mold as a pour gate. *The bottom plate will
have a #55 drill hole .150 deep in the bottom of each hole. No polishing
needed just a decent finish cut. Would probably need to have a ball mill
made. Can't find any in 1/ 1/16. Anyone intersted please email with *quote.

I don't know if you have found someone to quote this job or not, if
not then I would be interested in quoting it. If you have already
given the job toanother company, please keep me in mind for any other
job quotes you have.

Thanks,
JMK Tool & Machine