Best way to do this
Shelves of 3/4 ply, need to have dividers every 2"
The supply store did not have anything like traditional 1/4 HB for the
dividers, I ended up buying some 3/16 ply to use. Maybe a mistake.
How would you cut a 3/16 groove in the 3/4 boards? (I need them every 2",
making a total of 32 slots)
My sawblade is 1/8, my smallest router bit is 1/4 sigh
Suggestions please!
markndawoods
Ok, so here's what I did...
Cut each slot on the TS, standard 1/8" blade, single pass. Took each divider
to the router table and passed the edges over to shave off 1/32 on each
side. Could have taken 1/16 off one side, but hey, it was quick and easy and
now they are centered.
Thanks for all the suggestions!
markndawoods
|