Man at B&Q wrote:
On Sep 21, 3:13 pm, Dave wrote:
We are having a problem with the power shower.
I have electrically disconnected both ends of the supply cable and
removed the control knobs, but the plumbing part of it has me beat.

The shower case is a push fit onto the hot and cold copper pipes and
then screwed onto the wall. I have removed the three screws that are
shown in the paperwork and I read that I should push back 2 grey collars
and the case should come off the pipes. No matter how I push the collars
I can't get the case off the pipes.
Is there a knack, or have the push fit connectors jammed up?

Dave

All the showers I have fitted like this came with a tool for
disengaging the collars. A piece of plastic with two Slots that go
over the pipes so that both collars can be pushed back *at the same
time*. It should be relatively simple.

Thanks
There is no mention of a tool, just to push the collars back away from
the direction the pipes come in from. I know it works, as I had to do
this when I fitted it some years ago.
I forgot to mention it is a Mirage Showerforce.

Dave