GeneO wrote in message
...
Have been Googling the proper way to clean plated electrical contacts
but either get nothing if use " or a lot of nonrelevant hits without.
Am interested in any suggestions esp how to remove the nonconductive
oxides.
If a connector is too damaged would also be interested in what are
considered the best type replacement.
Thanks
Gene
Assuming not sputter damaged contacts, otherwise good underlying surfaces.
I use a nylon cable tie, introduced with the contacts in contact. In a
filing action with the ratchet part of the nylon, then turn upside down and
repeat
--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/