On Sep 13, 3:45*pm, "SteveB" wrote:
"Joe" wrote in message

...
On Sep 12, 8:25 pm, EJ Willson wrote:

Machine is 8 years old and has worked well for all this time. Today it
stopped working. When I turn the electricity on it hums and does not
rotate. It is not jammed. I can rotate the shaft by hand. Anybody have
any thoughts as to what is wrong?

Thanks,

EJ in NJ

Had them that I THOUGHT were turning, but there was definitely something in
there. *I'd turn it backwards, and it would unjam, then turn it on, and it
would jam in an instant. *Take a flashlight and some long forceps and look
in there. *If there is DEFINITELY POSITIVELY nothing in there, and the reset
button is punched, and you get a hum, time to change it. *8 years is about
the lifespan of a good disposal.

Kinda makes one find a reason to go out and buy one of those little
endoscope cameras ...........

Steve

I had a similar problem. Hum. Able to loosen the hex, but then it
would jam again.

I removed the unit and disassembled it. I found there was a nickel
wedged on edge between the spinning plate and the wall of the disposal.