John Rumm wrote:

Dave wrote:
Answering Dave's reply, it set me thinking about the routing of the
cable. When I fitted this shower, I tapped into the bath pipes and ran
them from under the bath, out side the panel and up a trunking that
was tight up to the bath along with the cable (high temp. spec) for
the pump. Now, I am not sure if the plumber re ran them to conform
with regs. (vertical/horizontal) I'll get my detectors on the job am.
I have bad feelings about this :-(


Where was this trunking? If its in the corner of the room then it is
within the expected cable routes anyway ;-)

It was the bath width away from the wall and fastened *on* it. Now there
is do indication that a cable is there. What I am bothered about now, is
did the plumber re-run the cable? I'll take the bath panel off when I
take the shower pump off and that should tell me, hopefully. I remember
him asking if I had any cable to do a re-run, but it was a very got day
in the bathroom and a cold pint was shouting my name when he did that
part of the job.

Dave