Tim S wrote:
The Natural Philosopher coughed up some electrons that declared:

seani wrote:
We've just had a slate floor put down in a small cloakroom and the
plumber is back to refit the toilet in a different position tomorrow.

I've tried it in the proposed position but notice the pan is likely to
end up with a very slight wobble if nothing else is used other than
the original screws when it's fixed to the floor. What solution should
I be checking for to make sure it's a good fix with no gap / rattling
etc?
Ditch the screws and glue it down with silicone.

I've got to fit my bog soon...

This trick of siliconing in: do you sit the loo up on packers (few mm) while
the silicon sets, then remove the packers and tighten the screws?

Just checking the details...

If the floor is dead flat, yes. If it aint, don't bother...

I just got a few matches, propped it and went around with the gun
forcing it underneath.
Cheers

Tim