Making a press plate
On 2009-08-14, Ned Simmons wrote:
I think there's some ambiguity in the original post. I believe Iggy is
talking about the rotating plate for an arbor press. The disc on my
Greenerd #3-1/2 is about 11" dia x 1-3/4" thick.
Yes, that's what I am talking about.
I have a 3/4" thick plate that I can use for most projects, and two
1.5" bars, it should probably suffice. I would need to cut this 3/4"
plate in several pieces and need to make some openings in this 3/4
plate.
i
|