On 2009-08-11, Calif Bill wrote:
"Ignoramus17579" wrote in message
...
On 2009-08-11, Calif Bill wrote:
And hey, wait a minute! the Drill Doctor is an example of a machine
DESIGNED to grind HSS with a diamond wheel. I've done hundreds of bits
[ ... ]
The wheel in Drill Doctor is not diamond, it is CBN.
[ ... ]
I seem to remember mine said diamond. Unfortunately I loaned to someone.
Can not remember who I loaned it to. So may buy the one that does split
points.
Note that while it does split points fairly well on *larger*
bits, it is close to useless doing 3/16" bits or smaller. I was having
great problems with mine, someone else in the club was posting that it
was doing a great job, so we both brought ours to the club meeting so he
could try mine and vice versa. I brought along a drill bit of the size
I was trying, and he brought along one of the size he was trying (1/2"
or so, IIRC)
Well ... he was able to do a nice job on his bit in my DD, but
not able to do anything reasonable with my drill bit (3/16" or 1/4")
with either DD.
http://www.drilldoctorstore.us/drilldoctor.html Describes it as a diamond
wheel
As I remembered from back when it came from the original maker.
All of them at that site look different from the one I have,
which is from the first maker.
Enjoy,
DoN.
--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---