On Sun, 9 Aug 2009 15:26:14 -0600, "Calab" wrote:
Howdy!
I just received a three year old B&S 3.5 horsepower mower from a friend.
Currently, it starts easy but starts pulsing once it's been running for a
few minutes.
I've been told that the mower ran fine until it was tipped onto it's side to
be cleaned out.
What I've done so far...
- cleaned the sponge air filter
- drained the gas and filled with new
- sprayed the carb with carb cleaner
- checked oil levels
- ensured that the throttle moves freely
The only thing that I can think of is that it's internal to the carb, or
that the springs on the carb are not in their correct location.
Photo's of the carb and linkage.
http://members.shaw.ca/linkto/temp/carb1.jpg
http://members.shaw.ca/linkto/temp/carb2.jpg
Any ideas on how to fix this?
Loosen the gas cap a tad and see it runs better. If so the cap vent is
clogged. Use a paper clip to clear the cap vent hole.
A fouled spark plug might be the culprit.