Overheating Henry Vacuum Cleaner... 4 screws not 3
Dave,
On the motor case remove the power cord retaining screw clamp.
Remove the ******** 3 ******** cross head screws in the bottom of the top
section that houses the motor.
Remove the top cover watching for the foam pad that will fall out usually.
Detach the motor wires.
Dunk the motor base itself in warm soapy water and agitate until you think
it's clean.
Repeat as there will still be a lot of crud in there.
Leave to dry somewhere for a day or more after shaking vigorously to
remove excess water.
Reassemble.
|