View Single Post
  #17   Report Post  
Posted to uk.d-i-y
Dave Osborne[_2_] Dave Osborne[_2_] is offline
external usenet poster
 
Posts: 548
Default DIY Wiki - Broken Links!

ARWadsworth wrote:

"Roger Mills" wrote in message
...
In an earlier contribution to this discussion,
ARWadsworth wrote:

"Roger Mills" wrote in message
...
Just been looking at the CH Controls and Zoning section - which
discusses the various heating 'plans'. For each plan - Y-Plan,
C-Plan, S-Plan, W-Plan etc., there is a link to a description on the
Honeywell site. . . . except that Honeywell have taken down that
very interesting
reference document, and you you now get re-directed their home page -
which isn't very useful!

Anyone know of an alternative source of these plan descriptions,
which could be linked to, instead of the 'dead' ones?

Salus do good clear diagrams

http://www.salus-tech.com/manuals/S%...%7D CP222.pdf


and

http://www.salus-tech.com/manuals/Y%...% 20CP322.pdf


and together

http://www.salus-tech.com/manuals/TC...NG%20front.pdf


Yes, they'd probably do for S-Plan and Y-Plan even though they're not
quite the same as the original Honeywell ones. Interestingly the
combined one which you cite uses 16-way wiring centres, whereas the
individual ones use 10-way boxes, more like Honeywell.

However, neither covers C-Plan or W-Plan.


PS Roger you remember the Y Plan timer overrun problem you helped me
with a few weks ago? I had to set the overrun timer to 7 minutes in
the end. WB technical informed me that the 24Ri overrun is just a 3
minute timer overrun. I may have more questions about that install if
you are still prepared to help.


I'll do my best! What led you to the 7 minute setting - what actually
happened if you set it to less?
--
Cheers,
Roger



The original Honeywell pictures are available

S plan

http://content.honeywell.com/uk/homes/Schemes/s1.jpg

Y plan

http://content.honeywell.com/uk/homes/Schemes/y1.jpg

C Plan

http://content.honeywell.com/uk/homes/Schemes/c1.jpg

W Plan

I cannot find it.


OK, I've redrawn these plans in Autocad. If someone wants to put them up
on the Wiki they're welcome. Please let me know what format/size you
want them and where to send them.

Here's a sample: -

http://tinypic.com/view.php?pic=oaaj3p&s=3