Thread
:
Strange CFL Failure Mode
View Single Post
#
26
Posted to sci.electronics.repair,sci.engr.lighting
Don Klipstein
external usenet poster
Posts: 1,431
Strange CFL Failure Mode
In , Victor Roberts wrote:
On 24 Jul 2009 08:43:43 GMT,
(Andrew Gabriel) wrote:
In article ,
Victor Roberts writes:
Ordinary incandescent lamps are made from soda lime glass,
which has enough conductivity at 100C to maintain a low
frequency (DC or 60Hz) discharge in T12 fluorescent lamps
using electrodes on the outside of the bulb. The place
where the wires are sealed in an incandescent lamp (the
pinch seal) is made from lead glass, that has much lower
conductivity than soda lime glass. Vacuum tubes are usually
made from borosilicate glass (Pyrex(R)) that has even lower
conductivity than lead glass, and much lower than soda lime
glass.
Thanks, interesting.
However note that Pyrex(R) no longer implies any particular
glass type, and in particular, it's no longer borosilicate
glass in the US.
Pyrex seems to still be a registered trademark of Corning,
at least in the US, though I do see that the use of the
Pyrex name has expanded well beyond borosilicate glass, for
example, to metal cookware.
This makes me wonder if the name "Pyrex" "expanded" to glass types other
than borosilicate, as opposed to merely being "expanded" to non-glass
items.
- Don Klipstein )
Reply With Quote
Don Klipstein
View Public Profile
Find all posts by Don Klipstein