Johnti had written this in response to
http://www.thestuccocompany.com/main...26-185079-.htm
:

Hi Mat,

Seems we may have the same problem as you did with our Hoover HSWD126
dryer ie. no heat in the dryer and need to re-set the tripped thermostat.

Did you (or anyone) find out how to check/clean the condensor? If so I
would be obliged if you could please pass on the brief details of how to
do this.

Regards John.



wrote:


Hi All,

I have a Hoover HSWD 126 washer dryer which keeps tripping the
thermostat. What I mean by this is there is no heated air coming out on
the tumble dry cycle even through it still goes through the cycle. The
machine is now just over 12 months old (out of manufacturer warranty).

The engineer came out a month ago (when it was still in warranty) and
showed me how to reset it (3 screws at the back, slide the top off and
press one or both of the reset switches). He explained this had
probably just tripped as a one-off but mentioned they commonly go after
2 or 3 years due to the fluff build up in the condensor.

How can I clean the condensor on this - if I unscrew the main back
panel, is it obvious? The engineer made it sound straight-forward...

Any help would be greatly appreciated.

Mat G
Birmingham, UK



-------------------------------------




##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.home.repair,uk.d-i-y - messages and counting!
##-----------------------------------------------##