NT wrote:
On Jul 21, 1:33 am, NT wrote:
On Jul 20, 2:57 pm, John Rumm wrote:
NT wrote:
This article could do with input/suggestions:
http://tinyurl.com/mewmhe
or
http://wiki.diyfaq.org.uk/index.php?...trics#Suppleme...

The article is now edited to read
"Unless an installation complies with the latest requirements of the
17th edition... then supplementary equipotential bonding is
required."

Are you saying that there is a requirement to bring all existing
installations into line with this? I'm not aware of any requirement to
do so.

Yes, but I think you are misinterpreting the sense of "required" to mean
something that building regs or some other authority say you must do now.

The "requirement" is a technical one from BS7671. There is no *legal*
obligation to install missing bonding (unless you a changing something
electrical in the room anyway, when one might argue that part P would
make it so).

However, to wire or alter a room containing bath or shower then one
*may* be required (for reasons of complying with BS7671 and for best
practice / good workmanship) to install or upgrade bonding. I use the
word "may" since the 17th edition is the first version in recent times
to offer an alternative to installing bonding.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/