I'm planning to replace the internal doors in my house:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1. Several of the room doors will be 4-panel 35mm thick. I'm thinking of
the Cadeby wood grain effect range (as sold in B&Q). Two problems:

a. Although most of the doors will be the standard 1981mm high, some
will be significantly shorter, down to 1955mm. I contacted the supplier,
who told me it is only acceptable to shave up to 6mm off the top and
bottom of the doors, otherwise their strength will be compromised.

b. One door is only 680mm wide, which is not available in this range.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2. The remaining doors are for cupboards (cloaks cupboard, general
storage cupboard etc). These need to be plain ply, 25mm thick, standard
height. Problem: all I can find anywhere are doors that are 35mm thick.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Solutions/comments anyone? (The room doors don't necessarily have to be
Cadeby -- we are just looking for substantial 4-panel doors).

--
Ian