In article , Dave Plowman (News)
writes
The device I need to connect to says 115200 baud.
No - TX and RX and obviously ground. Those are the only connections on the
device DB9.
High baud rate and no hardware handshaking, though 4m is not long for
RS232. I'd suggest a good quality screened cable. The mic cable
suggested by another poster should do the trick. Connect the screen to
the plug body at the PC end.
--
(\__/)
(='.'=) Bunny says Windows 7 is Vi$ta reloaded.
(")_(")
http://imgs.xkcd.com/comics/windows_7.png