In article , Smitty Two wrote:
In article ,
"Ivan Vegvary" wrote:

Running 3 #10's (stranded) in 1-1/2" PVC conduit. Total run 75 feet. Does
code allow me to have a splice within the conduit? Seems like it is kind of
accessible since I can easily pull it from both ends in case of problems.
Two 90° bends are involved but I am using long sweeps.

Thanks for the info.
BTW, while I'm typically not a cheapskate, on my retirement allowance I
would rather not pay for a new roll of wire ($65) when I'm only shy a few
feet. Buying a single 75' piece, by the foot, will still set me back $30.

All replies appreciated.

Ivan Vegvary

This is one of those instances where'd I'd say the code is a
"suggestion."

Then your advice is worth exactly what the OP is paying for it. In many
places, the Code is _the law_.

Sort of like a stop sign in the middle of nowhere in the
middle of the night. If you can solder well and put a couple of layers
of shrink tube on it, I'd say go for it. I wouldn't do it with wire nuts.

Code violation, and, if underground, unsafe besides. Electrical codes are
there for a reason. Don't advise people to disregard them.