Joe wrote:
On Jun 18, 7:35 pm, blueman wrote:
I know that the Fein Multimaster is supposed to be the gold standard
but at $200+ for even the base model (and $400 for the Top with quick
change, case, and attachments), the tool seems quite overpriced.
Plus, they charge a fortune for blades at about $15 a pop.

At the other extreme, Harbor Freight (yes, I know all the "bad" about
Chinese made/plastic/knock-offs etc.) offers a Multi-Function power
tool that seems to be perpetually on sale for about $39. Perhaps even
more importantly, the blades are $6 for a set of 3!!!

In the middle perhaps is the Dremmel Multi-Max Oscillating kit for
$100 with blades going for about $10 a piece.

Has anybody had experience with these or other oscillating
multi-function tools? If so do you have any perspectives on the
cost/benefit ratios of these different models?

i.e., Is it worth paying almost 10X for the Fein and its blades? Do
the blades really last 10 times longer? Is the tool itself
significantly more powerful or durable or comfortable to use or
quiet, etc.?

Now again please spare me the general rantings about Harbor Freight.
I am asking *specifically* about this tool. In fact, I usually
subscribe to the principle of buying high quality tools and "paying
and crying only once" but the difference here seems to be so
substantial and because of the high price of Fein blades the pain
and crying is not just a one-time thing. Also, I have in general had
good experiences with Harbor Freight for buying occassional use
tools that I otherwise couldn't either afford -- and if it's a tool
that I find I really like, then I consider the $20-50 spent as the
cost of a home trial and don't mind upgrading to a name brand. On
the other hand, I wouldn't trust Harbor Freight for heavy duty
precision power tools such as a sliding compound miter saw.

I bought my HF multi tool about a month ago and it already has many
hours of heavy duty use on a rehab project. Compared to the hours of
use other tools get in comparison to the HF, it seems silly to spend
any more than $40 or so on any multi tool. One thing about them, they
are SLOW! For digging up old linoleum and tile they are very
effective, but for trimming wood in a saw mode, if anything else will
do the job, forget the multitool. I anticipate using it for electrical
box cutouts in drywall where it should be better than a RotoZip.
Regardless, used within its limits, the multitool is fairly handy. You
just won't be needing it for many hours a day on a construction site
or major project.


Agreed. Each tool has its optimum use, although I see you've found "many
hours of heavy use" for the little feller.

Yesterday I used the tool to cut down two trash trees that were too big for
shears (about 2") and too small to dig out the chain saw. Can't wait for
Halloween to see how it works on pumpkins...

It's nice to have options.