On Jun 17, 11:23*am, JohnF wrote:
I posted here quite a while ago about the manky old concrete path in
the front garden of my London terraced house ... finally got round to
taking it up when, lo and behold, underneath is the original geometric
tiled path (small, coloured tiles in a "Grafham" design). *Over 90% of
the tiles are fine, mostly still stuck down to the base, but the base/
foundation has cracked and shifted, so it's a case of re-laying the
path on a new base.

This was confirmed by a pro company I asked to quote, who said it
would be too labour intensive for them to salvage/reuse the tiles on
my limited budget. *So, in the spirit of UK d-i-y, I'm going to try to
do it myself. *I will need to remove the tiles, clean them and get
some matching replacements, lay a new foundation, and re-lay the
tiles. *Any advice please on:

1) removing the old tiles which are still firmly stuck to the old
concrete/mortar base layer ("gentle" use of hand-held cold-chisel?)
2) cleaning dirt and concrete residue from the top surfaces of the
tiles? *(Acid brick cleaner or a more "sophisticted" cleaner from
someone like HG, followed by wet and dry abrasive? *One old post here
talked about using a carborundum stone and water)
3) removing big globs of concrete/mortar stuck to the bottoms of the
tiles - i.e., can I chemically or otherwise break the bond between a
tile and the old mortar it was bedded in, or somehow "shave off" most
of the old mortar/cement? (Someone suggested to me using an electric
tile cutting saw to get off most of this, but holding 2"x2" tiles
vertically upright against a fast saw blade sounds rather unsafe)
4) do I need a DPM under the new concrete sub-base?
5) I also need a new York stone front gate step, which needs to have
corners rounded at the front and also be notched to fit round the
flanking brick pillars - is cutting this a d-i-y-able job, or should I
make a template and pay a pro/supplier for a York stone cut to shape?

Many thanks for any advice whatsoever.

John

Hi John
I refurbished my Son's front path in his victorian house.
I cleaned the old cement off the surface of the tiles using Jenolite
rust remover which I had in the garage, this worked well.
I gently chiselled the old mortar off the backs, it came away quite
easily without damaging the tiles. I guess it was a fairly weak lime
mix.
The local salvage yard had lots of victorian tiles, so replacing the
damaged ones was easy.
I levelled the path with a dry 4 to 1 sand/cement mix and laid the
tiles on this. Then filled the gaps with the same mix.
This was over a year ago and the path is still fine.