On Jun 5, 10:17*am, dpb wrote:
dpb wrote:

... The JD link I tried earlier appears it only returns to the image when
the search servlet is open--this one appears to work directly to open
the image.

...
Sorry, forgot to paste it in after I got a direct link...

http://jdpc.deere.com/pimages/MP35/MP356__________UN02JAN94.gif

Note the safety interlock circuit doesn't show up on this wiring harness
parts diagram but is on the wiring diagram. *I think the pieces-parts
are Section 22 for the tranny lock; the mower deck safety switch is
probably in the accessories/attachments w/ the deck altho I've not
looked. *Not that I think that is important; I'm pretty sure that
portion is ok at this point.

--

Since you have no 12V anywhere, I'd focus on finding the lines to the
ignition switch. It only has 3 connections. One should be 12V hot
all the time. One other should be hot when switch is in run. Last
one should be hot when key is moved to start.

Since you have apparently verified that the interlock circuit has
continuity, that should not be the problem.