Bob Crawford wrote:
This was a recent experiment. Made from a 1x6 old Cedar fence board, some
small pieces of 1/4 inch plywood and some scrap pieces of mahogany. The
trick was hollowing the piece out without having it fling itself from the
lathe at 1200 rpm. The bottom was made separately and glued in place after
the piece was finished.

http://s104.photobucket.com/albums/m...t=DSCN0645.jpg


Nice turning. Perhaps a little larger base would make it look more
balanced.

--
Gerald Ross
Cochran, GA

I xeroxed a mirror, now I have an
extra copier.