DaveC wrote in
obal.net:

Low ESR is -good- for an electrolytic cap.

Uh, right. They were *high* ESR...

Thanks.

one other thing may be to measure the actual capacitance of each
electrolytic cap;I've had some that measured much below their nominal
rating.

and if -some- supplies are high,that could show that another one is being
loaded and the PS is driving harder to pull it up,raising the other
supplies in the process. Seen a lot of that in TEK WFM monitors.
--
Jim Yanik
jyanik
at
kua.net