On May 3, 6:36*pm, "Dirt Johnson" wrote:
"DaveC" wrote in message

obal.net...





Pioneer plasma model PDP-V401. Original symptom: shut off after seconds or
minutes or hours of operation. Power LED blinked error code 6 (as best I
can
determine the meaning of this code from Googling (I have no manual) this
means PS fault).

Replaced 16 electrolytic caps in the main PS that measured high ESR.

Now when first powered on after an overnight rest, it will shut off
immediately (stays on for maybe 5 seconds). After power cycling the main
switch (can't be done via remote -- must use the switch on the back), it
will
run all day without problem.

All PS voltages are OK (factory sticker inside lists them); all are a few
tenths high (ie, 5v = 5.04).

What next step would you take in troubleshooting this PS?

Thanks.
--
DaveC

This is an invalid return address
Please reply in the news group

Stick it in the vise lad!

I am Kirk Johnson
"Anal Stretching Specialist"http://www.imagefap.com/image.php?id=1988478267- Hide quoted text -

- Show quoted text -

YOU ARE BY FAR THE WORSE OF THE DIRTY LOW DOWN TROLLS HERE

YOU FAGGOT

YOU NEVER HAVE ANYTHING MANLY OR EVEN ON TOPIC TO CONTRIBUTE TO THIS
GROUP
YOUR LIVING PRIDE SEEMS TO BE YOUR RANDY PARTIALLY DESTROYED ANUS
STILL SUCKING OFF TEENIES ?

MOVE TO MARS HOMO & GET A LIFE

I AM PROTEUS