In article ,
Stephen wrote:
Don't forget that compression fittings are BSP sized, therefore the
correct spanners will (or should be) imperial size.
I did wonder that when I measured 28.5mm but then I thought if the
pipe is metric, surely the fittings will be too; I was forgetting that
15 and 22 mm pipe are essentially 1/2 and 3/4 inch pipe.
15mm and 1/2" are quite close: 22mm and 3/4" ain't. But it's the threads
on compression fittings which are BSP - only the bore and olive sizes were
altered for metric tube.
--
*I used up all my sick days so I called in dead
Dave Plowman
London SW
To e-mail, change noise into sound.