Smitty Two wrote:
In article ,
Bob Larter wrote:

Matt H R wrote:
I guess my Antex XS25 iron might be a bit too hot. It's nominally
quite hot at 390 degrees C (735 F) and could be running even
hotter.
It should be 360c.

Not if you don't have all day long to fiddle around. I never solder with
anything but 800 F. (427 C.)

That's silver-soldering temperature. If you use that for electronics,
you'd want to be damn quick with it!


--
W
. | ,. w , "Some people are alive only because
\|/ \|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------