"Bob La Londe" wrote in message
...
"Bill Noble" wrote in message
...
friend needs to make some space in his driveway quickly - this is a
smaller horizontal mill - floor standing, made in Taiwan, 1HP Baldor
motor for spindle drive, enco variable speed drive on table, tested and
working, $375 or make me an offer

contact me through the email address on my web site below if you are
interested. Delivery near Los Angeles can be arranged, he has a small
trailer that can move it.

--
Bill
www.wbnoble.com

Pictures http://img4.imageshack.us/gal.php?g=p3240499.jpg

In addition to the mill, that bob has kindly posted images of, my friend
needs to get rid of the following:

Atlas 12" Crafstman lathe, with change gear, bench model $600
Logan, 12" with turret, change gear, missing countershaft, bench model $900

tail stocks and compounds for Clausing 10 and 12 inch lathes $25 each -
these were in a factory that burned, but they look recoverable to me -
useful if you need a spare, but it will take work, and some kroil to get
them usable again.

and a totally amazing Gallmeyer and Livingston Number 5 Universal tool and
cutter grinder - this is a huge machine - must weigh 1500 pounds, maybe
more, I have the parts list here, must be almost an inch thick - it has huge
sliding beds in two orthoganal axis and lots of accessories, base is
aproximately 30 inches square, stands 50 inches tall, allowing full motion
of the beds requires 120 inches. This really would be a wonderful tool if
you have the space - $200, but you gotta move it.

as above, if interested, find my email on my web site, www.wbnoble.com and
then send me an email and I'll put you in touch with my friend.