On 2009-03-28, Todd Rich wrote:
Todd Rich wrote:
(snip)
time getting the right parts for the unloader. (If I looked at the right
pictures, your 390 has an unloader for when it is running at pressure...I
think that is a fixed, not variable, pressure setting on it.) Mine was an
older version that what was shown in the manual.

Actually, looking again, I think you have a setable pressure for the
unloader to kick in. If you don't want to use it, so that when it reaches
pressure, the motor shuts off, turn the valve off (the one just above the
oil pressure gauge).



Todd, could you elaborate. I am not familiar with this particular
unloader that I have on this compressor. My unloader on the 340 is a
lot simpler. I will greatly appreciate.

--
Due to extreme spam originating from Google Groups, and their inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/