On Mar 11, 12:08*pm, max wrote:
Hi I have this scope and all power outputs half volts low than its
originally should.After checking all components i found that transformer
* * * windings is shorted.do you know any companies who can re-wind the
transformer.Prefer companies in california.Thanks

Check the external wiring carefully: remember, the oscilloscope is
a vacuum tube device, it has high voltage windings and odd
requirements
for HV isolation of some of the windings. If you don't have a LOT
of data, rewinding it could be a disappointment.

Usually, a shorted winding gets hot; if it's really 'half volts'
that is the issue, look for a 110/220V selection switch.